The Mikado Logo 800 is not only the successor to the Logo 800 XXtreme, but could be considered the Logo 700's big brother. Built on a familiar, yet incredibly successful and proven Logo 700 airframe, the Logo 800 shares a lot of parts with the 700. Recommended blade size is between 750-810mm, depending on your personal taste. The same gearing is available from the Logo 700: 10.46:1 (w/13T Pinion), and 9.71:1 (w/14T Pinion). Thanks to not only it's lighter weight design, but overall design aspects allow the Logo 800 to accelerate quicker, and reach higher top speeds. For 3D flight this is beneficial in swift transitions, or any aerobatic maneuvers.
With off the shelf components, and 5000mAh batteries, an all up weight of around 12.13lbs is possible.
Features at a Glance:
* Facilitates assembly, maintenance and repairs
* The upper halves take up the entire mechanics including motor, ESC and servos. Servos are mounted directly into the chassis, with optimal position and angle in relation to the swash plate
* The lower halves take up the new and already known and proved battery quick release system (like on LOGO 500/600). Batteries will be installed to battery plates inline, which are held by two quick release mechanisms on both sides of the chassis
* The clever separation of the chassis parts increases the possibility that, after a crash, only the lower parts have to be replaced
* The chassis sports a big locating surface for the ESC, an opening helps with the air flow around the ESC
* In the chassis you find a place for e.g. a CPU cooler, so you can mount a motor cooler into the model permanently
* Cable guides inside the chassis allow for a neat and protected wire-layout to the ESC/telemetry at the front, within the chassis
* The clever design of the molds even allows maintenance of the tail gear box inside the chassis, without disassembling the chassis
* The torque tube system makes the tail boom easily dismountable, in case you want to travel e.g. to competitions
Specifications:
Rotor Diameter: ~1800mm
Rotor Blades: 760-810mm Carbon Fiber Rotor Blades
RTF Weight: >5,500g
Length: 1670mm
Height: 445mm
Width: 205mm
Battery Recommendation: 44.4V (12s) - 51.8V (14s) 5,000mAh Li-Po
Main Gear Ratio: 10.45 w/13T
Main Gear Size: 136T
Battery Tray Slot: 69x67x360mm
Package includes:
* (1) Logo 800 Helicopter Kit
* (1) Scorpion HK 4535-380kV Brushless Motor
* (1) 13T Pinion Gear
* (1) Set of Rotortech 810mm Main Blades
* (1) Set of Rotortech 116mm Tail Blades