New JetCat SPT15-RX Turboprop Engine with Dual Exhaust at the best price USD 3240. Please contact us for stock availability and ordering information.


JetCat SPT

Propeller-driven models do not have to do without the advantages of turbine technology. The JetCat SPT turboprop engines have high power reserves in high-tech guise. The basic design and function of the engines are similar to those used in man-bearing aviation. The principle is easy to understand. It is only necessary to convert the high power of the engine into usable shaft power in a suitable way. However, this is not easily possible at the very high speeds. The necessary reduction takes place in 2 stages. Once in a gas ratio, then through a gear transmission. This means that the gas jet of the so-called core engine drives a turbine wheel in operation, which sits on a second shaft. This second shaft is mechanically absolutely independent of the rotor of the basic engine and receives its drive power only from the kinetic energy of the exhaust gas jet. The second shaft drives directly into a gear suitable for high speeds, which reduces the speed to suitable propeller speeds. Also completely new is the electronic control which processes and regulates both the speed of the primary and secondary shaft. The pilot can fully concentrate on flying, the complex engine management is fully electronic.

Specifications:

Pressure ratio : 3,5
Mass flow (kg/s) : 0,37
Consumption Full load (ml/min) : 550
Consumption idle (ml/min) : 100
Weight [g] : 5180
Dimensions of the diameter (mm) : 112
Length (mm) : 520 x 170    
Exhaust gas temperature (°C) : 480-730
Idling speed 1st shaft (rpm) : 33000
full load speed 1st shaft : 125000
maximum speed 1st shaft : 12500
gear ratio 2nd shaft : 4,0 o. 10,24
idling speed 2nd shaft : depending on the propeller design
propeller Centering collar diameter : 18mm
full load speed 2nd shaft : 7000 o. 15000